Narrative of Fredrick Douglass

The greatest thing about reading Narrative of the Life of Fredrick Douglass is that there are many different and interesting themes to learn from. Throughout Douglass’ story he teaches us many lessons and motifs, but one thing that stays constant is his belief in the fact that all men and women should be created equal, with equal rights without any constraints to his or her own individual freedom.The treatment of Douglass himself and the other slaves he worked with was unbearable and under such horrible circumstances that after reading his autobiography; it really makes me wonder what other types of things other slaves had to endure during their experiences. Narrative of the Life of Fredrick Douglass shows its readers that even though times can get extremely hard, there will still always be hope even when you think there is none. One of the most important ways slaves were kept in bondage was not simply the threat of physical brutality; rather, it was through deep and sustained ignorance.Slaves were not allowed to read and write and were therefore generally not aware of the events outside of the plantation, could not communicate with each other well to provoke rebellion or conduct escape plans, and could not reach the sense of self-sufficiency and pride that came from being educated. Literacy brought with it an understanding of the larger world. It opened up before a slave the idea of justice and an understanding of history. Reading the Bible led to a truer comprehension of Christianity. Douglass was able to first engage with abolitionism when he attained literacy.He also became fully aware of the reality of slavery; he wrote â€Å"[Literacy] had given me a view of my wretched condition, without the remedy. It opened my eyes to the horrible pit, but to no ladder upon which to get out. In moments of agony, I envied my fellow-slaves for their stupidity† (Page 56). Ignorance was thus a way for slaveholders to keep their slaves manageable, happy, calm, and content. Once a slave moved beyond such darkness into a world filled with understanding, he was only able to do what Douglass eventually did – attempt to escape from his ties.While reading Narrative of the Life of Fredrick Douglass it is almost like reading about how white men dehumanized their slaves. The first example of this is shown in Chapter 1 when Douglass’ mother passes away. â€Å"Never having enjoyed, to any considerable extent, her soothing presence, her tender and watchful care, I received the tidings of [my mother’s] death with much the same emotions I should have probably felt at the death of a stranger† (Page 43).This quote explains that Douglass, like many other slaves, never had much of any relationship with their birth mothers. Considering that some slaves are taken away from their birth mothers only a few short years after they are born it is easy to understand why Douglass felt this way. It’s extremely sad to read how a chi ld can feel almost no emotion after hearing of such a tragic loss. I imagine if that were to happen to me and how I would feel and can only feel disheartened by the fact that most slaves never got to have relationships with their mothers.Another example of such degrading behavior by the slaveholders is simply how they scarcely feed their slaves. They expect so much work and cooperation from them and think that any amount of food, big or small, will help them to get their work done. Slaveholders instill in the minds of slaves that being unfed, whipped and called awful names is the best kind of life they will ever have. These were horrible characteristics of slavery but were well depicted by Douglass in his autobiography. According to Nathaniel P.Rogers’ Southern Slavery and Northern Religion: February 11, 1844 (Page 139), it is explained that Douglass arrives to give a speech and to tell his story to an audience who is very apprehensive and uncertain about hearing him speak. H owever, they were very curious to see him. After giving his speech, which was well received by the audience, he was asked more and more questions and they wanted to know more about his life and journey through slavery in general. â€Å"There was great oratory in his speech-but more dignity and earnestness than what we call eloquence.He was not up there as a speaker-performing. He was an insurgent slave taking hold on the right of speech, and charging on his tyrants and bondage of his race† (Page 141). Reading this review makes me really happy to know that while he had an awful time as a slave, escaping and gaining freedom was the best thing that ever happened to him. It is satisfying to read that others can feel for Douglass, though not come close to imagining what he had gone through, but having some sort of sympathy and realization that he and many other slaves are great human beings with inspiring stories to share about he freedom they all deserve. He teaches us that while we all go through horrible things; there is always a silver lining and something to be learned. Narrative of the Life of Fredrick Douglass has really taught me a lot about myself and about a whole other kind of people that I really had no knowledge of. I truly believe that Douglass makes his audiences believe in what stands for; all men and women should be created equal, with equal rights without any constraints to his or her own individual freedom. This autobiography has a lot to teach a person and I would recommend it to anyone.It is thoroughly enjoyable and is the kind of book that makes you look past just the text. It makes you think about your own life, putting it in perspective and realizing what is really important. It is an interesting story that not many have heard themselves and really know little about its topic. I suggest to anyone who wants to read this narrative that they keep an open mind no matter what their previous views, religious or not, are so that they can ful ly understand and accept this person’s journey through slavery.

Overcoming Defense Mechanisms Essay

Practical implications of each term are included for the benefit of organizations interested in applying theory in practice. Key words: organizational cohesion, action systems, compliance, culture of tradition, complete concrete systems, and symbolism Organizational Cohesion According to Etzioni (1961), cohesion can be defined as a positive expressive relationship among two or more actors that can reinforce negative and positive norms (p. ). He further differentiates cohesion bonds between persons of the same rank, peer cohesion, and cohesion bonds between persons of different ranks, hierarchical cohesion. The degree to which peer cohesion exists within an organization can determine how readily norms that are held by the majority of a given group or held by the most influential persons within a group will be accepted by the remaining group participants. In other words, peer cohesion dictates the degree to which actors within a given group are likely to mimic or adopt each other’s behavior and/or values. It has also been suggested by Homans (1951), that there is a direct correlation between the frequency and endurance of interaction within a group and the level of a group’s cohesiveness. In other words, the more group participants interact, the more likely it is that they will adopt each other’s mannerisms, outlooks, or orientations toward the larger group of which they are a part (Etzioni, 1961, p. 290). Assuming that norms that are beneficial to a particular organization are being fostered via peer ohesion, such as intra-team cooperation, the net effect could be a highly productive work environment with low employee turnover. Etzioni’s research implies that organizations with high peer cohesion tend to have low employee turnover, which reduces costs involved with recruiting and socializing new employees, knowledge capture, and maintaining daily work routines. However, it is important to note that cohesion can reinforce both negative and positive norms, which is to say behaviors that alienate an employee from an organization as well as behaviors that reinforce one’s commitment to an organization (p. 80 ). Reagans and McEvily (2003) suggest that cohesion, specifically social cohesion, influences the willingness of individuals to devote time and effort to assisting others within a given group, in addition to serving as a motivator to transfer knowledge to a coworker or colleague (p. 245). Ultimately, cohesion within an organizational group, can encourage a â€Å"you scratch my back, I’ll scratch yours† effect that can encourage knowledge exchange across employees and reduce direct peer-to-peer or intra-departmental competition amongst employees (Reagan & McEvily, 2003, p. 245). In other words, â€Å"by limiting competition, social cohesion promotes knowledge transfer,† which is an essential component of a learning and innovative organization (Reagans & McEvily, 2003, p. 247). Although organizational cohesion can foster â€Å"exchange relationships that build commitment† (Tyndall, 2012, p. 3), it is essential that organizational leaders recognize tipping points wherein too much cohesion could increase group-think and inhibit innovation, performance, and potentially disrupt a work-group’s alignment with the overall organization’s values, should a given group’s norms contradict such values (p. ). Where possible, organizational leaders might assess the power that cohesiveness has within their organization, identify the source of cohesiveness, be it an agent of the organization or the organization itself, and take the necessary action to either encourage or discourage the cohesiveness, depending on whether it currently work s in favor of the organization or to its detriment. Action Systems An action system embodies a collective effort to attain a single goal, as executed by interdependent work units’ processes, tasks, and functions. To attain its goal as a unit, a social action system adopts a structure and a process for organizing member activities† (De Ven, 1976, p. 25). An action system is a term used to describe a system that produces an output only if the necessary actions are completed by the appropriate parties throughout the entire production process-placing emphasis on the relationship that exists between actions and the larger task they accomplish. The existence of this term serves to illustrate a theoretical shift away from focusing on work units or groups and a shift toward focusing on the individual job holders’ roles within the larger group, analogous to speaking in of terms of cogs within a machine (Tyndall, 2012, p. 3). As Parsons (1951) has noted, â€Å"acts do not occur singly and discretely, they are organized in systems† (p. 7). Simply put, an action system is made up of two components: the actor and his situation (p. 7). By speaking in terms of action systems, the theorist or manager hopes to identify all factors that affect these two components in the name of achieving their end objective, be it decreasing production error and lags, and increasing production successes (non-defective output) or any combination thereof. The more an organization can identify all variables, resources, and actions required at each phase of production, the more it can regulate and manage them. â€Å"Resources and information flows are the basic elements of activity in organized forms of behavior† (De Ven, 1976, p. 25). If, for example, an actor works in reception at a doctor’s office, he/she might require a computer, medical forms, chairs for patients, clipboards, pens, etc. By tracking usage and resource requirements over an extended period of time, records might reveal that there are too many patients or too few chairs in the waiting area at any given time. Identifying this fail point will serve as a signal to the organization to either increase the number of chairs in the office, increase the number of business hours (to spread out patients), add a second partner, expand to a second location, or some other alternative. Total Quality Management, Lean Six Sigma, and Demings 14-Points of Quality are all examples of how organizations have provided structure to these very practices (Tyndall, 2012, p. 16-18) Just as an organization can identify, measure, and manage tangible resources along each stage of an action system, so too can an organization identify and measure intangible factors that influence workers orientation toward the organization and their assigned tasks. By understanding a worker’s motivation for being on the ob, an organization will be better equipped to frame that employee’s work and performance evaluation in such a way that will encourage the worker to achieve higher levels of performance. By structuring job functions in ways that directly attach task ownership to individual job holders, an organization can increase the accountability for that employee, and increase the likelihood of their experiencing satisfaction upon completely their assigned task –due to the ta sk’s proximity to its â€Å"owner† (Tyndall, 2012, p. 8). Forward-thinking and adaptable organizations will encourage transparency and two-way feedback between management and those who are managed. For this reason, it would be wise for organizations to seek input from employees when identifying areas of process improvement within action systems, share successes across the organization, and openly value collaboration between groups and collegiality within groups (Trist, 1981, p. 43, 57, & 49). Compliance Etzioni (1961) defines compliance as â€Å"a relationship consisting of the power employed by supervisors to control subordinates and the orientation of subordinates to this power† (p. xiii). Sciulli and Etzioni (1996) identify three sources of compliance: coercion, economic or pecuniary incentives, and normative values (p. 137). This interplay between the governors and the governed directly influences how an organization will function and be perceived by internal and external stakeholders. Further, the dynamic between these two parties sheds light on where power, and specifically the power to make change, resides within an organization. As was exemplified in The Challenger Disaster, the extent to which an organization’s members recognize when it is necessary to comply and when it is necessary to break from routine impinges on an organization’s ability to adapt and respond to catastrophic events: Argyris’s (1990) analysis of The Challenger Disaster brought to light the following: The problems were not only in the structure, rules, and independent monitoring devices. The problems also were that highly committed, well-intentioned, safety-oriented, can-do players reasoned and acted in ways that violated their own standards and made certain that this violation was covered up and that the cover-up was covered up. (p. 42). One could argue that NASA’s employees ignored their respective ethical instincts and instead complied with that of the organization, NASA: an unspoken practice of ignoring unsettling information in the name of making deadlines, satisfying stakeholders, or perhaps satisfying its own hubris. Regardless, this catastrophe serves to illustrate the negative implications of compliance, particularly as perpetuated through normative values. Organizational theorists, such as Ogbonna and Harris (1998) have set out to determine what behaviors within organizations evolve through genuine organic change and behaviors that evolve in response to deliberate actions taken by management via compliance. Their research indicates that efforts made by management to alter culture within an organization via compliance may prove successful, but not for a signal unified reason. In other words, an organization’s members may all buy-in to a behavioral modification or practice advocated by management, but for reasons that are unique to the individual members or groups of members within the organization. â€Å"Hence, a key implication of these findings is that managements attempting to alter culture should consider how multiple interpretations of the rationale for change influence the success of the change effort† (p. 284-285). Some changed in resigned compliance, some in authentic willingness, and some â€Å"cognitively accepted espoused values in order to further their careers† (p. 85-286). Management might benefit from this insight by carefully selecting which company practices or values they wish to indoctrinate employee with, particularly if such practices do not relate directly to tasks associated with production and instead relate to rules on how employees might govern themselves socially or culturally within an organization; if laun ching a new effort to encourage the valuing of X, perhaps it would be wise for management to seek employees’ input on why everyone should value X in order to determine whether a consensus on the promotion’s rationale exists. This will help ensure that all employees are not only helping to move the company in the same direction, but are doing so for the same or perhaps, intended, reasons. Culture of Tradition A culture of tradition within an organization consists of a subset of individual cultural traditions or â€Å"shared symbolic system[s] which function in interaction† (Parsons, 1961, p. 11). A culture of tradition is a culture that engender s its participants with values that center on traditional or historically patterns of interaction, patterns that have come to exist through repeated practice carried out by members of the organization. If an organization comes to value tradition, it could be inferred that such an organization will devalue or sanction behaviors that encourage or work in support of change, behaviors that we have come to know as organizational defenses or defensive routines. As Tyndall (2012) suggests, â€Å" defensive routines are rewarded by most organizational cultures because routines indicate a sense of caring and concern for people† (p. 13). Further, Tyndall suggests that routines are often protected by the same people who prefer that such routines not exist. Rather than expose detrimental cultural practices, organizations prefer to keep them hidden so as to prevent exposure and embarrassment (p. 13). For the purpose of this paper, let us assume that organizational identity and organizational culture are interconnected. Santos and Eisenhardt (2005) point out that â€Å"organizational identity helps members make sense of their situation by clarifying the defining attributes and purpose of the organization, thereby reducing ambiguity and providing direction† (p. 500). If an organization’s current culture, a culture of tradition, is borne out of circumstances from fifty years ago, it can be inferred that there will a disconnect or lack of alignment between the direction the organization needs to be going in and the direction it actually is going in. Santos and Eisenhardt go on to suggest that: Organizational members actively perform collective sensemaking (Weick 1995) through which they gain awareness of new information, share interpretations of prior actions, and converge on the meaning of environmental changes and appropriate courses of action. p. 500). Assuming that employees are constantly being exposed to new information, but are inhibited on how to make use of or capitalize on such information because of the existence of cultural constraints, it will not only discourage innovation within the organization, but will also stymie employee’s desire to exercise creativity and engage with the organization. Ultimately, an organization s hould work to align its identity, culture, and activities it carries out (p. 00), maintain traditions that to not impinge on efficacy of essential processes, and foster an environment that embraces conflict and change (Trist, 1981, p. 47). Complete Concrete Systems Parson’s (1951) defines a complete concrete system of social action as consisting of a social system, the personality systems of the individual actors involved, and the cultural system which is built into such actors actions (p. 5-6). A cultural or social system is stagnant, unless the elements included therein are carried out through practice and action via an action system (p. 17). He further elaborates: A social system consists in plurality of individual actors interacting with each other in a situation which has at least a physical or environmental aspect, actors who are motivated in terms of a tendency to the ‘optimization of gratification’ and whose relation to their situations, including each other, is defined and mediated in terms of a system of culturally structured and shared symbols. p. 5-6). Parsons emphasizes the need to consider these three elements independently, as no one can be further reduced or ignored in the context of the general theory of action systems. In short, Parsons wishes to draw attention to the interplay that exists between personality, culture, and the society in which these elements exist; one cannot consider personality without also considering the context in which it exists or has been cultivated. As an organization develops its sense of self, it might also come to recognize the types of personalities that it supports and the types of personalities that it prefers not to engage. Once an organization is able to identify the types of personalities it attracts or tends to hire, it might then explore the question of why it is that these personalities â€Å"fit† the organization; it may be that the personalities hired within an organization are in fact not working in favor of the organization’s larger mission, but instead reflect historical cultural practices that actually work against the organization. The more that an organization is able to hone in on the types of personalities, behaviors, and the types of individuals that it is best suited to hire or from which it would benefit the most, the better able it will be to refine the organization’s culture and overall defining character. This is not to suggest that an organization should attempt to hire one type of personality, but it is to suggest that an organization should attempt to identify the types of personalities best uited for particular work units, roles within such work units, and conceive of ways to encourage hiring, training, and evaluation practices, that foster the development of such individuals rather than inhibit them. Agents within an organization should be mindful of the personalities with which they interact, particularly when presenting ideas to or interacting with decision-makers. Framing ideas in ways that appeal to decision-makers could prove advantageous and foster productive discourse. Symbolism Symbolism, or symbolic systems of meaning, come into existence as individual social actors engage with social objects (Parsons, 1951, p. 10). An actor comes to expect or associate certain actions with particular results through practice. The dynamic relationship between actions and the associations one comes to assign to particular actions exists through communication that is both implicit and explicit across an organization. Like culture, symbols come to exist by observing or partaking in patterns of behavior; if I do X, Y happens, or on a more simple level, if I sit on X, X is a chair. These expectations form â€Å"pattern consistency† (Parsons, 1951, p. 10), or logical consistency that enable people to transmit information to one another in ways that can be easily understood, whether this transmission is intentional or unintentional. These transmissions deliver messages to the receiver and it is these messages that come to form symbols. For these reason, symbols are highly subjective and based on the perception of the message’s recipient. Organizations must be mindful of the role that symbolism has in shaping the culture of an organization. Eisenberger, Huntington, Hutchinson, & Sowa (1986) define perceived organizational support (POS) as â€Å"global beliefs about the extent to which the organization cares about [employees] well-being and values their contributions† (Fuller, Barnett, Hester, Relyea, 2003, p. 789). Research consistently shows that perceived organizational support (POS) is positively correlated with organizational commitment. In other words, the more an organization’s employees perceive themselves to be supported by an organization, the more likely it is that they will commit themselves to the organization and its mission. Further, when people perceive that their organization values and appreciates them, they interpret it symbolically to mean that the organization has respect for them or sees them as having a high status within their organization. Perceiving one’s self as having high status, Gardner & Pierce (1998) suggest, will likely encourage commitment to an organization; this encourages a person to believe themselves to be worthy of being an organizational member (Fuller, et al. , p. 790).

Autobiography Essay Essay Example for Free

Autobiography Essay Essay Many people in today’s society think just because I am a young lady I have an easy fun filled life. Well, that is not true. Life has many ups and downs but it is up to us whether we want it to be a successful one or not. Life is filled with obstacles for us to overcome no matter how tragic. Back in 2009, the most unexpected tragedy I thought that would never happen occurred. My grandfather died in September and my grandmother died in December. It was a hard and difficult time for me because they both died within a matter of four months apart from each other. Another incident occurred that was almost fatal. My brother was involved in a car accident in Kemp Road last year May. The accident was so horrific, the right side of his body was paralyzed. He had to do therapy at Doctors Hospital so he could drive and walk properly again. Sometime in everyone’s life, they are either nervous or scared to take an examination. I had my experience of nervousness when I had to take my national examination. In the Bahamas, the national examination is a test students would have to take for the Bahamas General Certificate of Secondary Education (B.G.C.S.E.) or the Bahamas Junior Certificate (B.J.C.). The exam I had to take was Music which consists of theory and a practical exam. Theory means to listen to a musical piece and answer questions about it and practical means to play a musical piece. When it was my turn to perform my musical piece, I panicked but I tried my best to keep calm. Yes, millions of butterflies were in my stomach just like any other person would have before a big exam like that one. As I played my piece, the millions of butterflies I was experiencing were decreasing by each note I played. By the time as I finished playing my piece, I was confident I passed and I did with a B. One of my greatest successes I achieved in my life is graduating from Aquinas College Catholic High School and receiving my diploma. I was very  satisfied with my accomplishment and achievement and made my parents proud. My other success in life is obtaining my driver’s license. For a teenager, having your license is a big deal because it is one step closer to freedom. Most persons could not say they have their first godchild until the age of 30, but I had the privilege of having my first godchild at the age of 16. Her name is Danielle Rigby and she is my pride and joy. Some other successes in my life are cooking and playing the flute from the age of 10, playing my clarinet from the age of 15 and being accepted into the great Bethune Cookman University. Some of the Bahamian dishes I can make are curry chicken and white rice, friend plankton, potato salad, BBQ ribs, minced lobster and many more. I have been playing the flute for nine years and counting, and I treat it just like a young baby. My future goals and aspirations are to graduate from college with honors, obtain a career where I can prove I am worth being there by working to the best of my ability and having a family of my own someday. All of these things I went through to become the young lady I am today. This is my life, my story. Autobiography Essay. (2016, Apr 24).

A significant event that occured in my life Essay

A significant event that occured in my life - Essay Example However, the contentment on having an ‘A’ did not last for long. Dad: I expected something better than an ‘A’ this time; no wonder you always let me down! Me: I’ll try harder next time, I am sorry. Dad: You better do, it is for your own good. Surely my father wanted to see a more successful person than I was. I greatly appreciated my father’s encouragement yet expected a bit of appreciation. I understood his urge to see a prosperous and winning person as his son. Whatsoever happened, it encouraged me on exerting more energy, time and efforts to achieve a better result. The whole academic year went with only one aim in mind, i.e. to attain a smile on my father’s face. The only possibility I could see to accomplish this aim was through attaining a better result. The struggles whole year resulted in satisfactory exam attempts. I hoped for good results as I did quite well in the examinations. My class performance was a standing example of my hard work. My teachers, friends and relatives appreciated me on every little achievement during my academic career. My aim, though, was to satisfy a person who was the hardest to please. I knew he wanted a better end result and does not appreciate these little achievements that I had. Walking ahead towards the car garage, the voice echoed once again and I smiled with a deep satisfaction on my results and achievements this time. The feeling of finally satisfying my father with the achievement of a full scholarship grew stronger. My uncontrollable feeling of happiness and urge for sharing the news with my father could not wait for him to enter the house. With the throbbing heart and a continuously smiling face I met my father in the car garage. My existence in the car garage was surprising for my father, but I was certain that my achievement is a better surprise and would fade away the presence of any other factor. With an astonishing expression, my father greeted me yet remained per plexed. I knew I had never given him any better than what I achieved that day. I expected the appreciating words any father can have for his son on having a scholarship. Like any other person, I was sure of some soothing words, a wholehearted smile and a sense of pride he would have for his son’s achievement. Without any delays, I disclosed the news of my achievement. Me: Guess what, I have got a full scholarship. I am one of the toppers at school. (I finally spoke up with uncontrollable emotions and in a passionate voice) Dad: Good, so when are you leaving? (The ever cold voice and emotionless response I heard) Me: I will discuss it in the evening. (I hardly uttered while he was busy locking the car). Sitting in my room I reviewed my life. When was the last time I went for vacations without having the cold voice demanding better grades and higher marks in my educational career? When was the last time I partied with friends for longer hours like others did? There were numerou s questions in my mind regarding my struggles and a greater number of awards and achievements which went unnoticed. The feeling that I had a few minutes back vanished like it never existed. I was badly hurt. My emotional state that moment was no better than a hungry man getting a loaf after days which is later found to be made of plastic, which is neither edible nor of any use. All my struggles went unnoticed. My achievement meant nothing but another hopeless attempt to bring a smile on my father’s face. The morale remains high as long as a person’

How might a seaside resort in 1870 be expected to differ from the same Essay

How might a seaside resort in 1870 be expected to differ from the same resort in 1930 What accounts for the changes - Essay Example People began to filter into the cities to find work and thus seashore towns were developed. Many of the first settlers along the seashore began to open up boarding houses and hotels. The wealthy stayed in hotels and the less wealthy people used the boarding houses. The first boarding houses rented for a fee of $8 – 12 a week for room and board and often included meals and a wagon ride through the cornfields to the beach. As an example, Point Pleasant Beach, New Jersey developed in the 1870s as a destination for visitors through Captain John Arnold. He retired from a sea career and bought land in Point Pleasant Beach. He built a railroad to the ocean, which is now known as Arnold Avenue. As in other seashore towns, the railroad was the most influential factor in development and tourism of seashore towns. The 1870s were an era of major tourism expansion brought on by developers who bought and subdivided old farms for vacation home lots. In 1877 The Point Pleasant Land Company bo ught a 250 acres farm and began selling lots. To attract buyers, a Resort House was built and began a horse-drawn trolley service for tourists. The Resort House was a four-story hotel type structure that housed 200 guests, and was the largest building in town. The resort featured shaded oak and locust trees, a manicured lawn and a clear view of the beachfront dunes. The inside included a ballroom and bowling alley, which was very upscale for that time. Several other hotels and boarding houses were built similar before the turn-of-the-century. Some of the hotels advertised access to New York and Philadelphia trains, trolley lines, water works, electric lights plants and no mosquitoes. Many of these hotels burned to the ground due to being wood structures and others lost business due to changing tastes in lodging. The first beachfront pavilion was constructed in 1880, and ten years later the first boardwalk was built. The first boardwalk was very flimsy and washed away within two year s. During the Victorian period rapid growth in population began in the seaside resorts. The railways made if possible for visitors to travel to the seashore, and it became much more affordable. The seashore had a nostalgic draw to people as a focal vacation point. A seaside holiday was considered very charming at that time. Again, only a few ordinary people owned cars or telephones until the 1950s. Even when televisions became available, they were very expensive for the average family. The working class worked hard all week in factories, offices, shops and mines and very rarely had the opportunity to travel. However, it became popular to set aside a time during the year to take a seaside holiday. This was popular both in England and the Americas. Traveling to the seaside became popular when it was decided that the sea and bathing in the sea was good for your health. Dr. Richard Russell advocated the use of seawater in bathing and in drinking to treat many early illnesses, in the lat e 1700s. So it became fashionable for the rich especially to visit the seashore. For people of England a railway trip to the seaside and a week or two-holiday stay at a resort was the highlight of the year. The popularity of holiday seaside trips grew until it became popular to take trips abroad to experience different lifestyles. This became very popular with the wealthy, as the ordinary person could not afford such luxuries. Just as the industrial revolution helped build the

Womem and men and media Essay Example | Topics and Well Written Essays - 250 words

Womem and men and media - Essay Example dorned with words like â€Å"Take It Off,† â€Å"Let’s Get A Room,† and â€Å"I Get Around.† I find these messages very tasteless and a huge deviation from what should be fed to a 15-year old girl. The manner in which you are exploiting media messaging vulnerability of teenagers is quite appalling. Most parents are worried about the possible impact these vulgar messages on teenage girls because your company is appealing for teenage girls to sexualize at tender age and sway boys to explore girls’ sexuality at inappropriate age. This is dangerous to the existence of a moral society. Hyper-sexualization and self-objectification are currently taking a toll on national health with many women losing self-esteem over their own bodies. Even though I am a loyal customer to the company, I will use social media platforms to discourage my family, friends and "friends of friends," colleagues and the entire the entire world from buying your PINK underwear if no c hanges are made. I expect the company should do more on making women feel empowered rather than sexualizing, objectifying and throwing their intimacy into mockery. I therefore expect your company to make necessary changes and stop perverting young

Adam Smith's Theory Research Paper Example | Topics and Well Written Essays - 750 words

Adam Smith's Theory - Research Paper Example Born in 1723 and died in 1790, Smith left a legacy in his model Wealth of Nations that has been an influential contribution in economics. In brief, the theory identifies the basic principles that nation acquire wealth and function effectively when individuals use capital and proficiency at their own diplomacy. His model revealed the nature of country’s prosperity as many learn the principles of economics. Up-to-date, his arguments are used and cited in debates as many learn from his great insights. Nevertheless, some people disagree with his assumption as many view him as an activist of callous individualism. Regardless of the way he is viewed, his theory is paramount in the economics field. How the economy does stem from his theory and importantly economists assume that the theory is accurate in how the world’s economy operates. At this point, this paper seeks to analyze the theory and lay a discussion of its pros and cons. Wealth of Nations In his theory wealth of nat ion, Smith noted that wages and prices might reach optimal level when freedom of using capital and skills as per wish is imposed (Smith, In Cannan & Lerner, 1937). He taught by examples of new products, which he argued that, when invented prices are usually high until when others discover the profit potential, and join the field then prices go down. Indeed this can be outlined in today’s electronics where such scenarios take place. ... According to O'Rourke and Smith (2007), the theory explored that there cannot be consumption if there is no production. To explain further, Smith’s theory affirmed cars do not just exist there is a process through which they are put together in production to manufacture cars. Similarly, capitalism works in this way in the sense that when a car is manufactured, those in need of a car search for it in the car factory and purchase as per their choice of the car. In the 21st Century, people do not just walk in the car factory and request to purchase the car but they are purchased by a dealership and later sold to clients. The main point that Smith wanted to highlight is that, one can break capitalism in two parts consumption and production. In this case, there cannot be consumption without production and vice versa. Applicability This law is applicable in today’s society in that one cannot purchase products at the market without being manufactured and supplied by a differen t party. Still, one cannot eat without preparing or acquiring food and cannot be in a house that has not been constructed. From his theory, Smith assumed that the market force ensured there is right invention of goods and services. The theorist based his idea on the aspect of free market economy whereby consumers have the free will to choose what they need. Smith perceived capitalism as the main aspect, which drives, and motivate the economy. He believed that it motivates companies and individuals to gain and accumulate profits. To support his argument, Smith developed two theories through a research on production in Europe during industrial revolution. The two theories are moral sentiments and wealth of nations, which

Literature Review Research Paper Example | Topics and Well Written Essays - 750 words - 1

Literature Review - Research Paper Example A majority of practitioner also do not use the recommended thiazide for managing hypertension (Deshpande, Patel, Godbole, Champaneri, & Patell, 2014; Drawz, et al., 2009). The non-adherence by physicians could explain patents’ lack of knowledge of non-adherence to treatment (Chiazor & Oparah, 2012). Non-adherence to guidelines could be a factor of years of practice and specialty area (Axon, et al., 2010). Educational programs, however, helps physicians to manage barriers to practice, improves their knowledge and confidence in approaches to care, and can therefore improve their adherence to recommendations towards better outcomes (Dacey, Arnstein, Kennedy, Wolfe, & Phillips, 2013). Evidence suggests that practitioners do not implement available guidelines in managing hypertension and this could be a factor to high incidence and prevalence of the condition. Identified effects of continued education, such as awareness of existing and new guidelines can improve outcomes and the current study seeks to ascertain possible effects of awareness initiatives. Framework/Theory: measurement of blood pressure, â€Å"diagnosis of prehypertension and hypertension,† new cases of hypertension, non-pharmacological approaches to treatment, threshold blood pressure level for treatment, and use of antihypertensive agents are the concepts that formed the study’s framework (p. 5). Concepts: blood pressure, â€Å"diagnosis of pre-hypertension and hypertension,† new cases of hypertension, non-pharmacological approaches to treatment, threshold blood pressure level for treatment, and use of antihypertensive agents Dependent Variable: blood pressure, â€Å"diagnosis of pre-hypertension and hypertension,† new cases of hypertension, non-pharmacological approaches to treatment, threshold blood pressure level for treatment, and use of antihypertensive agents A significant percentage of the

Philosopy Assignment Example | Topics and Well Written Essays - 750 words - 1

Philosopy - Assignment Example For this reason, the Chinese Government is immoral for killing unwanted orphans. 5. This is an informal fallacy. This is because of the verbal abuse against Bachmann and it doesn’t have logic because the writer doesn’t make any sense in the statement. First, the writer writes about Bachmann’s favor in drilling the oil, then verbally abuses her. The statement Bachmann wouldn’t recognize an oil well if she bumped into one doesn’t relate to the first one. This is because everyone wants to belong to particular group and wants to feel united with a crowd, and this evokes a sense of belonging and unity. Once everyone has read this novel, then there is approval and acceptable from the crowd. This is because Senator Barrow is the first arguer; he has presented an argument on the increased social security benefits. The second arguer attacks the senator’s argument by equating it with an argument for socialism. He attacks socialism and concludes that socialism is unrealistic. Since Senator Barrow had nothing to do with socialism, this means the second arguer commits the straw man fallacy. This is because the writer’s argument ignores the Norris argument and instead, attacks his family and personal attributes that are irrelevant to whether he was responsible for the collapse of the central bank tower. Instead, the argument attacks him in a fallacious way. This is because there are two correct conclusions that are implied by the first argument. That Pearson supports the argument that evolution should be discounted and that he is a cocaine-snorting pervert and at the same time, a member of the communist party. This statement misses the point entirely. This is because the appeal uses force. If David Cole is not appointed as the new sales manager there is bound to be severe personnel cutbacks in the department. The threat imposed on the department

Strategic Management Assignment Example | Topics and Well Written Essays - 750 words

Strategic Management - Assignment Example The existing laws and regulations have to be followed by the organization and the board of directors implementing corporate governance does not have any say in such laws. Corporate governance is a complex process that takes into account all the activities within the organization and possibly even outside the organization. It directly impacts the perceived quality of the organization among the consumers as well as the community therefore the organization uses this as a benchmark for developing the culture and rules within the organization. PART B According to me, strategy is the purpose of the organization and it aims to make sure that the organization is able to develop an edge in the market despite the increasing competition. Strategy needs to align with the vision and mission of the organization and it would be a collective effort rather than a collection of initiatives undertaken by different managers. If managers are free to develop their own strategy, they may risk losing the vi sion and mission of the organization. If however, the initiatives taken by the managers are being taken after considering the aims and vision of the organization then the action may be defined as a strategy. Strategic Management is indeed the level of managerial activity that falls between goals and tactics. It is the goals of the organization that define the strategy of the organization and strategic management on the other hand influences the tactics that the organization adopts in order to fulfill the goals identified. PART C a) Corporate governance is greatly dictated by external regulation. This is because the organization has to answer to a number of stakeholders which includes the external and the internal stakeholders also. These stakeholders demand that the organization comply with the external regulations. For example, the employees within the organization would demand that the organization comply with the Equal Employment Opportunity Act. If the organization fails to comp ly with such acts it would likely be held accountable by the law. Thus, an organization needs to consider external regulations before forming or revising its own corporate governance. b) Gamble is quite correct in his view that strong boards lead to good corporate governance. This is because it is the responsibility of the board to develop corporate governance which would later impact all level of the organization including the culture of the organization. However, Gamble did not take into account the fact that hierarchy within the organization often limits the power of the board in ensuring that the rules and regulations developed in the corporate governance are being followed properly and in the spirit that they are meant to be followed (Hill and Jones, 390). PART D In my opinion, there are only three generic strategies which are cost leadership, differentiation and segmentation. Some may increase the categories to be five in number but I believe they are just repeating the same s trategies, albeit minor changes. I do not think stuck in the middle is a strategy. I am saying this because a mix of strategy would be no strategy at all. By incorporating all aspects of the three generic strategies, the organization would lose its control over either one of the strategies. For example, consider the fact that L’Oreal introduces mascara that is believed to add extra length to the lashes as a

Network Design Essay Example for Free

Network Design Essay The objective at hand was to build a network from the ground up. This was accomplished by breaking down all of the sections and building upon all previous assignments. This was a good course as I learned a lot about all of the different sections of building a network. The pros are now I know how to build a network on the design side from the ground up. I learned quite a bit about using a lot of the technologies associated with networking and it allowed me to learn quite a few new concepts. Some of the downfalls about this course and what I have learned are I did not feel I accomplished much as there is no hands on training associated with the course. I do not feel like concepts and design ideas are a great resource to actually learn how to use any of the systems but they do give a pretty good idea. Cabling SpecificationsEthernet is a Local Area Network (LAN) technology with a transmission rate of 10 Mbps and has a typical star topology. Computers and devices must wait-and-listen for transmission time on the network as only one device can transmit at any one time. In order to operate with this network strategy, Ethernet incorporates CSMA/CD (Carrie Sense Multiple Access with Collision Detection). Each device on the network listens for the network to be clear before transmitting data. If more than one computer or device transmits data at the same time, then collisions occur. Once collisions are detected, all devices stop transmitting for a period of time until one of the devices senses the line is free and will then gain control of the line to transmit its data. Receiving devices just sit there waiting and listening for transmissions that are meant for them, which are determined by an IP (Internet Protocol) address. The main advantage to Ethernet is it is one of the cheapest networks to put into service. Compared to other hardware for Token Ring, Ethernet equipment such as hubs, switches, network interface cards, and cable (Cat5 common) is inexpensive. The main disadvantage to Ethernet is related to the collisions that occur on the network. Even though Ethernet cable (Cat5) is fairly inexpensive, it can become a cost issue if designing a large network as each device or computer requires its own cable connection to the central hub. Another disadvantage is distance limitation for node connections. The longest connection that can occur within an Ethernet network without a repeater is 100 meters. Todays Ethernet standards, 100 Mbps and 1000 Mbps, incorporate switched technology, which for the most part, eliminates collisions on the network. The IEEE (Institute of Electrical and Electronics Engineers) specification for Ethernet is 802.3 with three-part names designating the different types. For example, 10BASE-T is for 10 Mbps, and 100BASE-TX is for 100 Mbps. Token RingToken was developed by IBM as an alternative to Ethernet. The network is physically wired in star topology, but is arranged in a logical ring. Instead of a hub or switch like in an Ethernet network, a MAU (Multistation Access Unit) is used. Access to the network is controlled by possession of a token that is passed around the ring from computer to computer as data can only travel in one direction at a time. A computer that wishes to transmit data on the network takes possession of the token and replaces the token frame with data. The data goes around the ring and returns to the transmitting computer, which removes the data, creates a new token, and then forwards it to the next computer. The IEEE specification for Token Ring is 802.5 and it comes in two different speeds: 4 Mbps and 16 Mbps. The main advantage to Token Ring is there are never any collisions within the network, which makes it a highly reliable solution for high-traffic networks. The disadvantage to Token Ring is the network cards and MAU are more expensive than equivalent Ethernet hardware. FDDIFDDI (Fiber-Distributed Data Interface) is an architecture designed for high-speed backbones that operate at 100 Mbps, which are used to connect and extend LANs. A ring topology is used with two fiber optic cable rings. It  passes a token on both rings and in opposite directions. The specification for FDDI is designated by the American National Standards Institute as ANSI X3T9.5. The advantage to FDDI is that it uses two rings for protection in case one ring breaks. When a break occurs, data is rerouted in the opposite direction using the other ring. It is also considered reliable because it uses a token-passing strategy. The disadvantage to FDDI is the expensive network cards and fiber optic cable. In addition, the amount of fiber optic cable is doubled because it has redundant rings. WirelessLocal Area Network (LAN) TopologiesA mesh topology has a point-to-point connection to every other device (node) within the topology. The point-to-point link is dedicated between each device so it will only carry traffic to the two devices that is connected by that link. The advantage of a mesh topology is it works on the concept of routes, which means that traffic can take one of several paths between the source and destination. The network is also robust in that it will not be crippled if one path becomes unavailable or unstable due to each device being connected to every other device. The Internet uses a mesh topology to operate efficiently. The main disadvantage to a mesh topology is the fact that it requires a large number of cables, which is very expensive. A bus topology is a multipoint topology that entails each device being connected to a common link or path. The common link can be thought of as the backbone to the network. All devices typically connect to the backbone with a T-connector and coax cable. The main advantages of a bus topology are that it is easy to install and is not expensive (cost effective) because it uses very little cable to build. The main disadvantage is if there is a problem with the one backbone cable, then the entire network will no longer have the ability to communicate.  These networks are also very difficult to troubleshoot because any small problem such as a cable break, loose connector, or cable short can cause the outage. The entire length of cable and each connector must be inspected during troubleshooting. Another disadvantage is the lack of amplification of the signal, which results in a limited network size based on the characteristics of the cable because of how far a signal can travel down that cable. A ring topology means that each device is connected in a ring, or daisy-chain fashion, one after another. A dedicated connection only exists between a device and the device on each side of it. Data flows around the ring in one direction. Each device contains a repeater that regenerates the signal before passing it to the next device. The main advantage of a ring topology is that it is easy to install. One disadvantage includes difficulty to troubleshoot because data flows in one direction and it could take time to find the faulty device when there are problems. The entire network could be taken off line if there is a faulty device or cable break within the ring. The star topology has each device in the network connected to a central device called a hub, which can actually be a hub or switch. All traffic must pass through the hub in order to communicate with any other device on the network. There is no direct communication between devices like in a mesh topology. One advantage to a star topology is any failure to one cable or device connected to the hub will not bring the entire network down. Repairs can be done to individual nodes without disrupting traffic flow. Another advantage is expandability of the network. Additional devices can be added to the network without disrupting any of the current users. All that is required is an additional cable run from the device to the hub. One disadvantage includes cable costs because each device must have its own cable connected back to the hub. The other disadvantage is the hub itself.  Since all traffic runs through one device, it becomes the single point of failure. If the hub goes down, so does the entire network. Wide Area Network (WAN) DesignA WAN, also known as a Wide Area Network, is an essential part to bigger corporate networks most government networks and companies with multiple sites as well. A WAN, basically, is 2 or more LANs (Local Area Networks) stuck together and running as one big network over a big geographical area. Although a WAN could cover very small distances, most WANs cover much larger geographical areas such as a country or possibly even the world. The largest WAN today would technically be the internet or the World Wide Web. The internet is, in short, one giant WAN because it consists of many smaller LANs and servers. Most WANs can cover a fairly large geographical area, but some, such as the World Wide Web can cover the globe. The United States Government has quite a big WAN as a lot of their LANs are in other countries. They need to get data from one place to another almost instantaneously, and this is one of the quickest and easiest ways to be able to do so. To be able to get on the internet, a subscriber must go through an ISP (Internet Service Provider) and they will give the subscriber access to the internet for a certain price every month. There are different ways to get access to the internet depending on the geographical location in which you live. A subscriber can go through dial up, which is one of the slowest methods, but it is also one of the most common. There is also DSL (Digital Subscriber Line) through most phone companies if they have access in the area and cable which is usually one of the fastest and most expensive methods to access the internet. The last common method is using a satellite to obtain access. This is usually the most expensive ways to access the internet because the equipment usually needs to be bought. When talking about telephone lines, we start getting into analog versus digital signals and degradation over longer distances. A telephone system works on analog signals. These work by a computer transmitting a digital  signal to the modem which converts the signal into an analog signal (this is the beeping heard when a computer dials up to access the internet) and later being converted by a different computer back into a digital signal with the use of a modem. DSL is digital all the way, along with T1 and T3 lines. When using DSL or T1/T3 lines, a filter of some sort is used to filter out the digital and analog signals, so the phone and computer are receiving different signals. Companies usually use faster lines to access the internet or to have access to their other sites. Smaller companies can use DSL or Cable internet services, but when talking about larger corporations or the government, most use public systems such as telephone lines or satellites. Usually, when talking about larger companies and going through a public system, we are talking much faster speeds that can hold many more users. T1 and T3 lines are usually used, satellites are commonly used and fiber-optic is becoming much more common. When getting into many users on a WAN, we need to start talking about Network Latency. According to Javvin.com network latency is defined as “latency is a measure of how fast a network is running. The term refers to the time elapsed between the sending of a message to a router and the return of that message (even if the process only takes milliseconds, slowdowns can be very apparent over multi-user networks). Latency problems can signal network-wide slowdowns, and must be treated seriously, as latency issues cause not only slow service but data losses as well. At the user level, latency issues may come from software malfunctions; at the network level, such slowdowns may be a result of network overextension or bottlenecking, or DoS or DDoS activity.”Dos or DDos stands for Denial of Service and Distributed Denial of Service respectively. These types of attacks are usually by hackers or someone who does not want others to access a certain service. There was a recent DoS threat on the CNN webpage as some hackers wanted CNN to stop talking about a certain issue. This works by one or multiple people talking all of the networks latency or bandwidth from them and thus causing other not to be able to access their site or services. There are other issues that may slow down a users PC as well. Not all issues revolve around hacker attacks. A lot of problems could be caused by malicious software, such as, Spyware, Malware, Viruses, or other programs that may be problematic. These can usually be taken care of by installing anti-virus software or even a spyware removal tool. The issue here is instead of the malicious software causing slowdowns on a PC, there are slowdowns due to the software protecting a certain computer in the background. Sometimes a simple fix to this problem is to defragment a hard drive. This can tremendously speed up a PC, because the files will be closer together and easier and quicker to access. On a network, a simple way to test latency is to use the trace route program. To do this, simply go to a command prompt and type tracert and then an IP address if internal or a website if external. This will send out packets of information and check how much time has passed to receive a packet back. The time passed would be the latency time. Usually it says it only took a certain amount of milliseconds which does not seem like very much time, but it was only a tiny packet of information. The higher the milliseconds the higher the latency time. The higher the latency time, the longer it will take to do anything in a network. If a high latency time is present, there is bound to be lag somewhere down the line. In a WAN, the equipment that will be used is as follows. In each LAN there will be PCs connected to a router somewhere (this is a ring topology example) and that router should be connected into a switch. There may be more but this is a basic example. Each of these LANs then connects to a central HUB somewhere which should interconnect all of the LANs. All of the information then travels to the central hub which is then separated out to the correct switch, router and then PC. There are usually central servers that can store and backup all of the data on the network as well, but this was an example of a crude network. Most companies also a very repetitious and redundant with their WANs. This is because they do not want a central failure point to bring the entire company to itÂ’s knees. There are usually multiple switches that can tie the  entire system together. If a huge corporations Wan decided to fail, the company could lose a few million dollars in a matter of minutes. This is the main reason redundancy in this situation makes more than enough sense. A lot of companies use software called VPN software. This software will let users login from the outside into their computer inside the company. This is a very nice system because if an employee needs to do work from home, they have access to everything they working on onsite. This is also helpful from an Information Technology perspective as it allows the Tech who is working on a remote problem login remotely and find out what the issue is, make any configuration changes and fix most software related issues without actually having to be onsite. This works well when being on call from an offsite location. There are other software packages that work well too. A lot of companies use PCAnywhere to do this type of work and Bomgar is another solution to be able to remotely login. A WAN is an imperative part to any corporation, government agency or company with multiple locations, as it allows them to transfer data quickly, easily and over great distances at the click of a button. There seems to be more and more need for employees in the networking field today, because more and more corporations need to transfer data quicker and easier. There will be new technology soon that will improve our current technology such as fiber optic. Network ProtocolsThere are many solutions to remote access and the most common and one of the most cost efficient methods is the VPN (Virtual Private Network). VPN technology is already built in to most operating systems and is very easy to implement. With bigger environments and corporations, a consideration for concentrated VPN hardware should be in place because of the simultaneous users and stress on the servers. There are a few different types of VPN including IPsec, PPTP and SSL. Once the connection from remote access has been made, you need to make sure the files are readily accessible for the user logging in remotely. One way to do so is to use Samba which is an open source file access system. There  are other ways to allow access as well. Using remote desktop connection, the user has the ability to log directly in to their PC and use it as if they were sitting at their desk, rather than away from the company. A lot of companies use software called VPN software. This software will let users login from the outside into their computer inside the company. This is a very nice system because if an employee needs to do work from home, they have access to everything they working on onsite. This is also helpful from an Information Technology perspective as it allows the Tech who is working on a remote problem login remotely and find out what the issue is, make any configuration changes and fix most software related issues without actually having to be onsite. This works well when being on call from an offsite location. There are other software packages that work well too. A lot of companies use PCAnywhere to do this type of work and Bomgar is another solution to be able to remotely login. Network Remote AccessMost companies need to be able to access their work from many locations, including home and while traveling. The solution that allows them to access the network is one of two ways to access their network. The first is through a VPN (virtual private network) that allows the user access to remotely log in easily and quickly. The other way is through a dial up remote connection; this way is a bit easier to set up but can become very costly in the long run. The problem with being able to do this is it can be very costly and can eat up much of the IT departments time to set up, configure and implement this system into the current hardware. The definition from whatis.com about a VPN is “ virtual private network (VPN) is a network that uses a public telecommunication infrastructure, such as the Internet, to provide remote offices or individual users with secure access to their organizations network. A virtual private network can be contrasted with an expensive system of owned or leased lines that can only be used by one organization. The goal of a VPN is to provide the organization with the same capabilities, but at a much lower cost. VPN works by using the shared public infrastructure while maintaining privacy through security procedures and tunneling protocols such as the Layer Two Tunneling  Protocol (L2TP). In effect, the protocols, by encrypting data at the sending end and decrypting it at the receiving end, send the data through a tunnel that cannot be entered by data that is not properly encrypted. An additional level of security involves encrypting not only the data, but also the originating and receiving network addresses.”A VPN, also known as a Virtual Private Network is a helpful tool that allows users of a specific domain to be able to log in to their PC from anywhere in the world with the help of another PC. With this tool, they would log in with a special piece of software, using their user name and password to gain access to all functionality of the PC they want to log in to. This allows for a lot of comfortable solutions, such as if an employee is sick, they may still have an option to work from home. This allows a flexible company schedule as well because if a user needs to access a document from their home PC, they can essentially log in to their work PC and download t he document. Network Business ApplicationsA second way to access oneÂ’s computer from a different location would be using a dial up service, with this you can basically dial in to access all of their resources available within the server. Using this is a very secure and easy route to go, and allows the user access to files they may desperately need. Another good thing about using a remote connection to access a server is if the user is on a business trip, they have the ability to access all of their much needed documents easily and securely with out much fuss. The explanation between these two pieces of technology is “with dial-up remote access, a remote access client uses the telecommunications infrastructure to create a temporary physical circuit or a virtual circuit to a port on a remote access server. After the physical or virtual circuit is created, the rest of the connection parameters can be negotiated.With virtual private network remote access, a VPN client uses an IP internetwork to create a virtual point-to-point connection with a remote access server acting as the VPN server. After the virtual point-to-point connection is created, the rest of the connection parameters can be negotiated. ”There are many advantages and disadvantages to using a dial up remote connection over VPN. The biggest advantage I have been able to find is, it is easier to set  up and maintain while using VPN makes you set up and maintain individual accounts for both the VPN and the users name and password on the system. Another advantage of dialing up in to the system would be the fact that no matter where the user is all they need to do is plug into a phone jack and they should be able to log in. The disadvantage of this is depending on where the user is long distance charges may apply and it could rank up a pretty penny or two. Another disadvantage is although the system is cheaper in the short term, the system may be more expensive than VPN in the long run. There are also other methods of using VPN. One specific way is certain ISPs (Internet Service Providers) and other third party support companies are assisting in setting up the VPN and supporting it without a great deal of time spent on it by the current department. This may or may not be more cost efficient than setting it up yourself, but it does remove a lot of the headache that VPNs can give due to different errors. There are also many advantages and disadvantages to using a VPN over a dial up system. One of the biggest advantages to this system over a dial up system is in the long run this is a much cheaper system than a dial up system. This system is a little bit quicker than a dial up system as well. This system is cheaper than a dial up system because using a dial up system, long distance fees may apply, with the virtual private network, you do not need to worry about this as the user may call into a local internet service provider to gain access. Any internet connection will gain a user access to the companyÂ’s network through a VPN. Through all of this, there still needs to be security measures put in place to keep unwanted users off of the system while allowing employees or other authorized users access without down time. VPNs can work well with firewalls, all the IT department would need to do is allow the ports to be accessed by the VPN and the user should have full access. All in all, there are two very cost effective solutions at a companyÂ’s finger tips and both are fairly easy to set up. The company needs to decide if they want to save money up front and make it easier so they do not need  to set up multiple accounts per user, or if they would rather have a better solution and save more money down the road. The choice also depends on the amount of users logging in at any given moment. Backup and Disaster RecoverySecurity, back ups and disaster recovery are all important very parts of all networks in todays world. The problem with today is information on how to hack, destroy and program any type of malicious software (or malware) is easily accessible via the Internet and other easy to access sources. There are roughly 1.4 billion people on the Internet or that at least have access to the Internet in the world, which is about 25% of the worlds population. All of these people have extremely easy access to hacking networks, creating malware and destroying any personal or private data a user may have and wish to keep. There is not really any way to stop these people from harming our personal software and data from their side, this is why a user needs to make sure they have security on the users side. There are other things that happen besides people trying to maliciously harm a users files and data. Accidents can happen and destroy data as well. There could be many things that can harm a users data such as a fire, earthquake, power surge or worst case scenario, some sort of electro magnetic pulse (EMP). This is where data back ups and disaster recovery come in nicely. There are many companies that specialize in helping a user or company back up their data and store it off site such as SunGard (mostly used in bigger company settings). There are other ways to store a users data as well. One way is to make a physical copy of everything needed on CDs, DVDs, Flash Drive or some other type of media and store it at a friends house or some other persons house they trust. This keeps a hard copy of all of their data off site just in case something happens and it can now be restored. There are a few other companies as well that offer on line backups. For this a user downloads their software and it automatically backs up to a few different location for redundancy which allows the customer more safety and easier access to all of their files. One of the first steps to a business that wishes to be very secure in all  that they do is to set up a backup and disaster recovery plan to start it all off. Like I stated earlier, there are many way s to do it. If this is a larger company they probably want to hire someone internally to make a physical back up of all the data and send it to an off site company for storage. They should also keep another copy close to them at all times, preferably away from where the physical data lies. They should put it on the opposite side of the building than where the file server is. If anything happens to the servers, they can quickly and easily use their backed up copy of all the data and recover it on to the servers in which they lie. Most companies have 2 or 3 backup units on site for redundancy and this allows that if one of those go down as well there are still a couple others in which they can restore all of the data from. Although this can become a little more expensive than just a regular back up system, sometimes it can be well worth it. Network SecurityAccording to devx.com “the first step in drafting a disaster recovery plan is conducting a thorough risk analysis of your computer systems. List all the possible risks that threaten system uptime and evaluate how imminent they are in your particular IT shop. Anything that can cause a system outage is a threat, from relatively common man made threats like virus attacks and accidental data deletions to more rare natural threats like floods and fires. Determine which of your threats are the most likely to occur and prioritize them using a simple system: rank each threat in two important categories, probability and impact. In each category, rate the risks as low, medium, or high. For example, a small Internet company (less than 50 employees) located in California could rate an earthquake threat as medium probability and high impact, while the threat of utility failure due to a power outage could rate high probability and high impact. So in this companys risk analysis, a power outage would be a higher risk than an earthquake and would therefore be a higher priority in the disaster recovery plan.”Another big part of any security system development is the company (or department) needs to look at their budget and how much they are willing to spend on their system. A company can get a basic security system for their network (including firewall) for fairly cheap and this may do most of what is needed, but larger companies are going to need to spend quite a  bit more money than that of a small company. Most larger companies spend quite a bit because they usually have higher priced clients that they can not afford to lose and all of their data is invaluable to the company. Some companies actually have their own Information System Security employees to monitor the network in case of any type of attack. They also make sure all of the anti-virus and anti-malware softwares are running and updating properly. Lastly, another thing most companies forget about after they have their equipment and software installed is there is more than just the implementation of the hardware and software to save them. They need to make sure everything continues to run and update itself from newer and bigger threats. These companies need to make sure they continually test and check what needs to be done to continually maintain a network that can not be broken in to. There are people out there that can be hired to try and break into a companies network. They get paid and let the company know what needs to be fixed so others can not break into it as well. In conclusion, a company can be nothing or brought to its knees with out its network and servers. There are many things that can cripple a company without the help of man. The only way to avoid these is to have a proper disaster recovery plan and to make sure the network is not vulnerable in any way. References About, Inc. (2004). Network topologies : bus, ring, star, and all the rest. RetrievedOctober 12, 2004, from http://compnetworking.about.com /library/weekly/aa041601a.htmBrain, M. (2004). How stuff works : how wifi works. Retrieved October 12, 2004,from http://computer.howstuffworks.com/wireless-network.htm/printableNetwork Latency. (n.d.). Retrieved April 27, 2008, fromhttp://www.javvin.com/etraffic/network-latency.htmlBroadband Internet. (n.d.). Retrieved April 27, 2008, fromhttp://www.pcworld.idg.com.au/index.php/id;988596323Wide Area Networks.(n.d.). Retrieved April 27, 2008, fromhttp://www.erg.abdn.ac.uk/users/gorry/course/intro-pages/wan.htmlVirtual Private Network. (n.d.).retrieved May 11, 2008, fromhttp://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci213324,00.html#VPN vs. Dial up. (n.d.). Retrieved May 11, 2008, fromhttp://technet2.microsoft.com/windowsserver/en/library/d85d2477-796d-41bd-83fb-17d78fb1cd951033.mspx?mfr=trueHow to Create a Disaster Recovery Plan, RetrievedMay 23, 2008, from http://www.devx.com/security/Article/16390/1954World Internet Usage Statistics, RetrievedMay 23, 2008, from http://www.internetworldstats.com/stats.htm

Visual Arts of the World Essay Example for Free

Visual Arts of the World Essay Visual arts ranged from a variety of objects. These are works of art that are crafted with visual in nature such as paintings, photography, architecture, filmmaking and sculpture. Thus, these pieces of art are primarily meant for visual consumptions. This study will tackle on wooden sculptures belonging to two different cultures: the bulol or Ifugao rice god of the Philippines and one of the early wooden sculptures of Yoruba Nigeria of Africa. The said art forms will then be examined, analyzed, compared and contrasted. The formal elements or physical appearance of the work will be discussed first and second, its cultural representations and significance. According to the British Council Arts, sculpture is the art or process of creating representational or abstract forms, either in the round or in relief. It is a form of art that is being carve either on wood, ivory or any material that the artist decide to do so. Ifugaos are inhabitants of the Central Cordillera in northern Luzon in the Philippines. Their origin is derived from the term Ipugo which means â€Å"from the hill†. According to Ifugao mythology, the name â€Å"Ifugao† is derived from Ipugo which refers to the rice grain given to them by their god Matungulan. Until today, this kind of rice grain is cultivated by the Ifugaos (Sianghio). On the other hand, according to The Africa Guide, Yoruba are people who live in Southwest Nigeria and Benin. They have developed a variety of diverse artistic forms which include pottery, weaving, beadwork, metalwork, and mask making. There are more than 401 known Yoruba gods so most of the artworks, which include sculptures, are made in order to honor the gods and ancestors The bulol, generally means deity, is specifically a granary idol. It is considered as an effigy of deceased ancestors (Asian Studies 63). In accordance to the C. E. Smith Museum of Anthropology, it is carved human figurines that is usually made in pairs—male and female—and are kept in the house or granary. Some bulols are standing while some are squatting with folded arms (Masferre and de Villa 54). It is an abstract art, according to Alfredo Evangelista of National Museum of the Philippines (1970), because the Ifugao carver expresses his feelings rather than attempts realistic representation. The deformations are results on the emphasis on the quality of other worldliness or the preternatural. The bulol is the most crucial art form because it embodies the Ifugao’s most sacred traditional values (Asian Studies 62). On the contrary, the Yoruba Nigeria sculpture follows the typical form of an African sculpture—cylindrical. African wooden sculptures are primarily cylindrical in appearance and are also made of wood. The statues are carved from trunks or branches (Segy 14). According to Frank Willet, the head is very much depicted because the Yoruba believes that it is the seat of one’s destiny, therefore it must be symbolically bigger and more prominent than any other part of the body. He has also identified three characteristics of Yoruba sculpture: bulging eyes, protruding lips and simplified ears which can clearly see in the chosen piece. The selected sculpture is not defined whether the art form is a female because the chosen Yoruba sculpture is naked, showing its stout breast or a male, exposing its phallus. Carving a bulol usually takes six weeks to finish and it is accompanied by rituals and dancing. The male and female bulols are carved at the same time (Masferre and de Villa 54). In contrast, the Africans believe that trees are home of spirits so in order to pacify the spirit of the tree, a special ritual is done before the cutting of the tree. The two selected sculptures are both anthropomorphic in forms which mean that the works of art ascribe human characteristics. They are both made of wood. If the bulol is often placed in a granary to protect the harvest, the Yoruba sculpture is used as an adornment and indicates a social status. The chosen works of art have utilitarian and historical relationship with the culture of the carver. They are both religious symbols and are accompanied by certain rituals. If bulols are considered as ancestors whose spirits can protect the living (Alvina and Sta. Maria 199), the Yoruba sculpture is a manifestation of the relationship of the African and the spirits of dead members of his family, which is extremely important in their culture. From the cultural background of bulol, it can clearly be seen that Ifugao are farmers. They live in an agricultural area where they primarily rely their lives. On the other hand, the Yoruba sculpture, as a social symbol, indicates that the owner is from a wealthy class, however, it is not clearly indicated or stated that the carver is also from a domineering class in their society, thus, the carver can come from the lower class in the society. Those chosen visual arts need to be seen, perceived and judged with an open mind. They should not be anchored to the Western standard of defining â€Å"what is beautiful† or â€Å"what is aesthetically pleasing† because they will definitely fail to abide to the Western standard with regards to â€Å"what is art,† which is confined then to fine arts—paintings, sculptures of artists that appeal to the senses and emotions—pieces that express the Western notion of â€Å"beauty† and portrays realistic figures especially when it comes paintings and sculptures just like how Michelangelo comes up with his â€Å"David,† the famous depiction of male beauty (History of Beauty). If the wooden sculptures of Yoruba and Ifugao are anchored to the Western standards and notions of ‘art’ and ‘beauty,’ those pieces will then categorically be labeled as â€Å"primitive† due to their irregular proportions and eerie appearance. Illustrations This Yoruba sculpture has originated at Yoruba Nigeria in Africa. It is an anthropomorphic figure and a manifestation of the nexus of the dead African family members to the living. It is a religious and status symbol. It is an early Yoruba sculpture. The artist or carver of the sculpture has not been stated but definitely he belongs to the culture of Yoruba. It is 34. 3 inches or 87 cm tall and made of wood (not specified). . This bulol is one of the forms of a rice god—sitting with folded arms. It is usually put in a house or in a granary for protection. It is often carve in pairs—a male and a female. It has a length of 6. 5 inches, a width of 6. 5 inches and a height of 24 inches. The artist or carver is not also stated but definitely he is an Ifugao. The sculpture is made of wood (not specified). Works Cited Asian Studies. University of the Philippines: Philippine Center for Advanced Studies Philippine Center for Advanced Studies, 1972.Alvina Corazon and Santa Maria Sta. Maria. Halupi. Capital Publishing House, 1989. Gagelonia, Pedro A. Concise Philippine History. Philippines: Far Eastern University Consumers Cooperative Incorporation, 1970. Masferre, E. and Jill Gale de Villa. A Tribute to the Philippine Cordillera. Makati City, Philippines: Brier projects, 1999. Perkins, Morgan and Howard Murphy. Anthropology of Art. Oxford: Blackwell Publishing, 2006. Segy, Ladislas. African Sculpture. New York: Dover, 1958. Willet, Frank. African Art: An Introduction. Singapore: Thames and Hudson, 1971. â€Å"African People and Culture. † The African Guide. 02 December 2008. http://www. africaguide. com/culture/tribes/yoruba. htm. â€Å"Cutting: The Woodcarver. † 18 April 1995. Yoruba. Conner, Michael. 02 December 2008. http://www. fa. indiana. edu/~conner/yoruba/woodcarver. html â€Å"History of Beauty. † Answers. com. 02 December 2008. http://www. answers. com/topic/beauty â€Å"Ifugao. † Tripod. Sianghio, Christina. 02 December 2008. http://litera1no4. tripod. com/ifugao_frame. html. â€Å"Sculpture. † British Council Art. 02 December 2008. http://www. britishcouncil. org/arts-art-sculpture. htm List of Illustrations

History of the Development of Impedance Cardiography (ICG)

History of the Development of Impedance Cardiography (ICG) Review the history of the development of impedance cardiography (ICG) from its theoretical base and direct applications for non-invasive measurement of cardiac output, to its most recent applications in assisting CPR, in rate responsive pacemakers and its potential application in automatic electrical defibrillators (AEDs). Impedance Cardiology often called ICG, is a measure of change across the thoracic region of the body over the cardiac cycle. If there is high fluid volume and blood flow, a low impedance across the region is calculated. Impedance Cardiology is also used to measure blood flow in major vessels of the cardiac region from which stroke volume is obtained. A change of impedance can be useful in calculating stroke volume, cardiac output and systemic vascular resistance due to the fluid volume changing with every heart beat. Cardiac Output (CO) along with the concentration of haemoglobin and arterial oxygen saturation are the cornerstones in the movement of oxygen. Cardiac output can be used to confirm the usefulness of treatment or if treatment is required as it analyses the functional performance of the cardiovascular system. The measurement of cardiac output is important in cardiothoracic surgery. There are several different methods for calculating the cardiac output. Firstly there is invasive methods that are quite accurate however the use of these methods are usually limited to intensive care units. While using invasive techniques the loss of blood, risk of infection and other complications are usually a matter of concern which leads to a alternative method, that being a non-invasive technique. For example Impedance Cardiology (ICG) is a method that is used quite often as it is easily used, provides a continuous reading of the cardiac output measured and has a better accuracy than that of other non- invasive techniques that are available. Impedance Cardiology involves applying a current field across the thorax using a constant magnitude, high frequency and a low amplitude alternating current.  ¹ Bio-impedance is a non-invasive technique where the stroke volume is estimated based on the changing of impedance that occurs in the human arterial system during the cardiac cycle due to the constant change of blood volume. Cardiac output is a lot easier to measure by impedance cardiology compared to thermo dilution with a catheter interested in the pulmonary artery, as it can be applied quickly and easily. It also does not cause risk of blood loss, other complications or infection that would be carried with the arterial catheters. Invasive methods cannot monitor the cardiac output continuously whereas ICG will. Non-invasive techniques are the solution to all these problems. Cardiac output is calculated by multiplying the stroke volume by the heart rate. Stroke volume is the volume of blood that is pumped by the heart during every cardiac cycle. This means that measuring the differences in impedance gives an estimate of the changes in stroke volume. ¹ The American Heart Association (AHA) resuscitation guidelines stated the chest compressions are the main source of effective cardiopulmonary resuscitation (CPR). A number of feedback devices have been developed to try to improve the efficiency of chest compressions, all of which improved guideline complaint CPR but did not improve the patients outcome. The ICG provides a non-invasive measure of the hemodynamic status of the body and is being investigated as another method of helping to improve CPR. This led to a study being set up Heartsine Technologies to investigate whether there was any relationship between compression depth, thrust and ICG amplitude during CPR. This also let a correlation between these to be established. The impedance cardiogram was recorded using 2 electrodes from defibrillation pads. The compression depth (cm), compression thrust (kg), end-tidal CO2 (kPa), systolic blood pressure (mmHg), carotid flow (ml/min) and cardiac output (L/min) were all measured at two minute intervals for each model (13 porcine models in total).  ² The results of the study showed that there is a strong correlation between the correlations achieved with compression depth, compression thrust and between ICG amplitude. The table below shows the results obtained in the study and shows the correlation between the three: The ICG measurement provides another measurement of CPR efficiency with physiological effects that are compared to chest compression depth and chest compression thrust. The results show that the ICG measurement could be used in the development of CPR feedback algorithms for AEDs (automated electrical defibrillators).  ² Improved impedance cardiogram measurement and recording methods have enabled their use in critical care of patients. Cromie reported that the use of both ICG recordings from two defibrillator pads , which is used to overcome the awkward application of using multiple electrodes and frequency analysis of the calculated derivative of the impedance signal (dZ/dt) which also provides information about circulatory arrest that occurs in the porcine model.  ³ He then reported an algorithm that was based on the ICG using the peak magnitude in a frequency range for detecting cardiac arrest. It was brought about that the frequency analysis by Fast Fourier Transform (FFT) in public access defibrillators (PAD) and automated electrical defibrillators (AEDs) would compromise its processing capabilities and the use of integer filters to calculate the frequency components was proposed. An algorithm that was only based on the impedance cardiogram that had been recorded through the use of two defibrillator pads, by using the strongest frequency and amplitude, could lead to a decrease in beginning CPR and could determine the circulatory arrest. Integer filters were used to analyse the frequency of the impedance cardiogram signal. Filters are lighter, simpler and a lot more adaptable when it comes to comparing with Fast Fourier Transform (FFT). This approach is more desirable as it limits the processing abilities of the devices that could compromise usability of the FFT, even though the approach is less accurate. The two techniques were compared with one another using 13 cases of cardiac arrest and 6 of normal controls. The best filters were used on this set and an algorithm that detects cardiac arrest was tested on a much wider set of data. The algorithm was then tested on a validation set and the ICG was recorded. It was tested on 132 cardiac arrest patients and 97 c ontrols. The results indicated that cardiac arrest using the algorithm had a sensitivity average of 81.1% with the samples ranging from 77.6-84.3%. The specificity of the validation set was 97.1% with the samples ranging from 96.7-97.4% at a 95% confidence limit. These results show that automated defibrillators with impedance cardiogram analysis has the potential to improve emergency care by enabling non qualified persons to carry out appropriate CPR and it can also improve the detection of cardiac arrest when the algorithm is combined with ECG analysis. ³ He then reported an algorithm that was based on the ICG using the peak magnitude in a frequency range for detecting cardiac arrest. It was brought about that the frequency analysis by Fast Fourier Transform (FFT) in public access defibrillators (PAD) and automated electrical defibrillators (AEDs) would compromise its processing capabilities and the use of integer filters to calculate the frequency components was proposed. The results of the frequency spectrum of the first order derivative of the impedance cardiogram (dZ/dt) recorded using the two defibrillator pads can be used as a marker to calculate circulatory collapse. The results obtained provide tools for the development of applications for the use of impedance cardiograms in defibrillators in emergency clinical practice. Automatic Electrical Defibrillators are available in public areas along with trained rescuers. AEDs that recognise circulatory arrest use a hemodynamic sensor together with algorithms based on ECGs, would aid in the management of collapsed patients where accurate, quick and critical decisions must be made.  ³

International Law: Piracy, Law of the Sea, and Use of Force Essay examp

This paper will answer the four questions presented below: 1. What is the jurisdiction of the International Criminal Court over piracy? 2. To what extent may European nations claim jurisdiction over acts of piracy committed off the Horn of Africa? 3. What international law enforcement co-operation mechanisms exist to assist in the investigation and prosecution of piracy committed in waters off the Horn of piracy? How these mechanisms assist in the investigation and prosecution of piracy? 4. What barriers to successful prosecution of Somalia piracy exist? What is the jurisdiction of the International Criminal Court over piracy? Explain your answer. Piracy becomes one of significant matters across regional, because the menace of piracy attack, especially in the hot spot area as the Horn of Africa is still going up and causes a plenty of loss. As piracy acts as universal crime, so that universal jurisdiction must be adapted to combat against piracy. Although, international community attempts to cope with this issue by establishing mutual-operation, but the final step is to bring pirates into legal proceeding. Some other countries seem to have a limit within their own jurisdiction, so that piracy cases may not be prosecuted after they were captured. Some countries may reluctant to participate in this content as same as reluctant to co-operate with international community. Hence, the establishment of international court which can take responsible on this matter will be an extra option to solve a problem. International criminal court is one of another option that may reduce the conflicts in the case of piracy. The jurisdiction of th e International Criminal Court can be explained under the Rome of Statue which provides a p... ...nal of International Law Rome Statue of International Criminal Court, opened for signature 17 July 1998, A/CONF.183/9 (entered into force 1 July 2002) Totten, Christopher & Bernal, Matthew, ‘Somali Piracy: Jurisdictional Issues, Enforcement Problems and Potential Solutions’ (2010) 41(2) Georgetown Journal of International Law Thedwwall, Craig, ‘Choosing the Right Yardarm: Establishing an International Court for Piracy’ (2010) 41(2) Georgetown Journal of International Law Treves, Tullio, ‘Piracy, Law of the Sea, and Use of Force: Developments off the Coast of Somalia’ (2009) 20(2) The European Journal of International Law Very, Francois, ‘African maritime Security: A Time for Good Order at Sea’ (2010) 2(4) Australian Journal of Maritime and Ocean Affairs http://treaties.un.org/Pages/ViewDetails.aspx?src=TREATY&mtdsg_no=XVIII-10&chapter=18&lang=en

The Ideal Hero :: essays research papers

There is always a common, ideal, hero a person may have in may have in mid. One might stereotype against the sex of the imaginative ideal hero to finalize their judgement on whether they will have the qualities of being a true hero. Having the same cultural perception will 'box out' other ideas that another person may have suggested. Relying on these stereotypes brought out by others, we are able to use them to build our own stereotypical understanding of a hero. But the true question is, how are they brought up to be a hero? The common stereotypical view of a true hero would tend to be big and muscular. Never will you see a small and skinny boy walking into a free falling ton of bricks to save his loved ones. Take 'Superman' for example, he would be seen to have the qualities of what a true hero would strive for. The quality in which only a male would suit for stereotypically, as for women they are more commonly seen to be less heroic and more of a household slave. Heroes would commonly be seen to be male as they would have the courage to fight for what he believes in. They aspects of which we can only see in a male as they are more commonly seen to come back home with a female at his hand to massage him and feed his needs. Males and females are quite the opposite in what they look for in each other. A male would look for a nice innocent, good looking girl, where as a female would want to look for a man who is strong and will protect her at any means. This then comes to show how females then become reliant on a male for her safety needs. Heroes always start from the somewhere and then train till they reach the needed standard where they are then needed to protect their city. Having the abilities, they still must train to maintain the control over the power they now possess. Spiderman is an example, he once was originally a young man whose goal was just to get into university and study science, while on an excursion to a museum he was bitten by a venomous spider, having no life taking effects but instead turning him into a man who now possesses spidery features. Then once having control over the power he now possesses he must arise at every moment where his city and loved ones may run into danger.